This is Yokomo YZ-2 DTM31 1/10 2WD Offroad Competition Buggy Car EP. The 2WD off-road car YZ-2DTM specialized for dirt roads has been upgraded to 3.1, and is now available with more practical equipment! Although it is an upgrade, it is a newly designed part that covers the entire chassis, and it is no exaggeration to say that it is a new machine. With the goal of improving the sense of stability corresponding to the speedup due to the intensification of the power source, the time will be improved by lengthening the chassis, changing the wheelbase in the steering hub carrier, and changing the rigidity balance by reviewing the front and rear parts composition. We have achieved total balance. The suspension has also been changed to the latest configuration such as changing to a 3mm shock shaft, upgraded to a responsive suspension, and the system for the 2022 season is fully prepared.
The steering hub carrier has been newly designed, and the kingpin position of the steering block has been moved 1 mm forward. The wheelbase and alignment have been changed to further enhance stability.
While inheriting the chassis rigidity design that matches the driving conditions of the dirt specification (DTM), the long wheelbase improves stable driving performance and cornering speed.
The front lower suspension mount is a new shape made of aluminum, and by turning the suspension mount over, the position of the suspension can be set in addition to the conventional height, and the position raised by 1 mm can also be set.
The bulkhead mount and side plate, which were previously separate parts, are integrated. By increasing the rigidity of the front section, the sense of stability for steering operation has dramatically increased.
On the other hand, around the rear, the rear mount base and upper arm mount, which were previously integrated, are separated to promote the flexibility of the rear and enhance traction.
Maintenance is also improved by making the upper arm mount a separate part. You can access the differential simply by removing the shock and 6 screws, making maintenance and setting changes easier.
The battery holder has also been newly designed, and the mounting method has been reviewed to increase rigidity. By turning the holder over, you can easily adjust from 1 cell size to the thickness of a normal short Li-po battery.
The rear shock tower has been changed to the latest specifications that allow you to select from 5 mounting positions on the upper side of the damper.
The rear wing newly adopts the ASTRO high clearance 7 inch wing made by J Concept.
Length: 408mm (including wings and tires)
Overall width: 245mm
All equipment weight: 1500g
Secondary reduction ratio: 1: 2.6
Yokomo YZ-2 DTM31 1/10 2WD Offroad Competition Buggy Car EP (1 set)
2 channel radio set
Battery (short Li-po, 2 cells)
1/10 size 2WD buggy
2.2 inch tire / wheel
Paint for polycarbonate