Vanquish VS4-10 Portal Axle 4WD Rock Crawler Builders Kit EP

Description:

This is Vanquish VS4-10 Portal Axle 4WD Rock Crawler Builders Kit EP. The F10 Portal Axles are widely praised for their exceptional durability, precise engineering, machined gears and smooth performance, making them a top choice among enthusiasts.

The VFD Twin Transmission offers on-the-fly selectable overdrive (6.5% or 46%) and a 3-position dig. It's built for durability with machined internal gears and chromoly shafts for smooth, reliable power transfer and a machined motor plate, bearing plates, and posts for maximum strength and stability under load.

The VS4-10 Portal Axle Builders Kit features a high-performance drivetrain with the VFD Twin Transmission and F10 Portal Axles, delivering unmatched control, durability, and efficiency. With on-the-fly selectable overdrive, a 3-position dig unit, and precision-machined gears throughout, this drivetrain is built to handle the toughest terrain with smooth, reliable power transfer.

The versatile battery tray accommodates most batteries, including hard case LiPo and standard stick pack sizes, ensuring a perfect fit for your needs. The VFD Twin servo mount locations are integrated into the chassis.

The Vanquish Products VS4-10 Chassis combines scale looks with high performance. Its steel C-channel design offers scale detail and strength, featuring dual servo mounts, winch line routing, and a fuel cell. The molded rock sliders have a replaceable tapered outer portion. The machined aluminum panhard mount withstands severe trail impacts. Molded shock towers secure the 80mm Incision S8E Shocks. Pro rod ends are also included. The VS4-10 Chassis brings unmatched rigidity, superior build quality, and a versatile design, making it a popular choice for a wide range of projects.

The VS4-10 features Incision 80mm S8E shocks with 8mm bore hard anodized aluminum threaded bodies, dual X-ring seals, locking preload collars, keyed spring cups, polished steel shock shafts, and machined pistons. The front 3-link with panhard suspension offers scale looks by hiding the servo, while allowing full suspension travel. Stainless steel links ensure low weight and durability.

A proven combination of 3-link with panhard front suspension and triangulated rear suspension will allow your custom project to perform as good as it looks. The high clearance chassis and 80mm S8E shocks will give you the flexibility and predictability to conquer the terrain.

Feature:

• VFD Twin Transmission
• Machined Motorplate
• Machined VFD Front Gears
• Machined VFD Twin T-Case Gears
• Aluminum VFD Posts
• F10 Portal Axle Housings
• Machined Hypoid Axle Gears
• Machined Portal Gears
• Heavy Alloy Portal Knuckle Weights
• Brass Axle Tubes
• ISD10 Driveshafts
• On the fly Selectable Overdrive
• Standard Overdrive 6.5%
• Selectable High Overdrive 46%
• Use Overdrive neutral position for 2WD (disengage front output)
• Dig with 3 Positions
• Slipper Eliminator
• Machined Internal Gears
• Hardened Chromoly Shafts
• Molded VFD Twin Extended Skid Plate for Motor Protection
• Sintered Shift arms with Brass pivot shift bushing
• Chromoly slide dogs for Overdrive and Dig shifting
• Scale Molded Transmission Housing
• Machined Bearing Plates
• Machined motor plate
• Molded Spur Gear Cover
• 32P 52T Spur and 15T Steel Pinion
• Molded Plastic Axle housings
• Universal Style Axle Shafts
• 49 Degrees of Steering
• High Caster reinforced C-Hub
• Heavy Alloy Portal Knuckle Weights
• High-Pinion Machined Hypoid Axle Gears (30/8)
• 6mm Output shafts with M5 wheel nut
• One-Piece Molded Bearing Retainers
• Adjustable Lower Shock Mounting Position
• Scale removable third member
• Heavy Duty High Clearance Steel C-Channel Frame Rails
• Integrated battery tray and electronic mounting positions
• Stainless Steel links
• SC8E Incision 80mm Shocks with bleeder screw shock cap
• Hard Anodized Aluminum Shock Bodies
• Stainless Steel Links
• Stainless Steel Pivot Balls
• Stainless Steel offset lower shock pivot balls for tuning shock width at axle

Specification:

• 5.25:1 Axle Gear Ratio
• 15T Pinion
• 52T Spur Gear
• Overall Width Hex to Hex - 200mm (7.87”)
• Wheelbase: 313mm (12.3")
• Overall Front Ratio (Standard 6.5% OD): 53.7:1
• Overall Front Ratio (High 46% OD): 35.8:1
• Overall Rear Ratio: 57.2:1

Include:

• Vanquish VS4-10 Portal Axle 4WD Rock Crawler Builders Kit EP (1 set)

Required:

• ESC
• 540 Motor
• Steering Servo (Vanquish 20mm servo horn included) 
• Battery
• Transmitter and Receiver
• Tools
• Paint
• Body
• 1.9inch Tires
• 1.9inch Wheels