Traxxas 1/5 X-Maxx The Ultimate 8S Monster Truck RTR 2024 Limited Edition Green Version w/ 2.4GHz Radio

Description:

This is Traxxas 1/5 X-Maxx The Ultimate 8S Monster Truck RTR 2024 Limited Edition Green Version w/ 2.4GHz Radio. X-Maxx® is the truck that defines Traxxas Tough. The new 2024 Limited Edition X-Maxx Ultimate comes outfitted with over $1,000 in high-strength aluminum and performance upgrades, along with all-new belted Sledgehammer® tires.

Feature:

• High Performance Aluminum Upgrades

• 6061-T6 aluminum C-hubs

• 6061-T6 aluminum steering blocks

• 6061-T6 aluminum rear hub carriers

• 6061-T6 aluminum differential housings

• 6061-T6 aluminum motor mounts

• 6061-T6 aluminum wheelie bar wheels

• Aluminum motor washers

• VXL-8s™ waterproof electronic speed control

• 8s LiPo compatible

• Built-in cooling fan

• Real-time telemetry via Traxxas Link™

• Machined heat sinks

• 10-gauge silicone wire

• Integrated protection circuits

• LED status lights

• Velineon 1200XL Brushless Motor

• 4-pole 1275 kV

• 5 mm output shaft

• Aluminum slip-on heat sink

• Dual motor cooling fans

• 50+ mph with Two 4s LiPo Batteries and Optional Spur Gear (sold separately)

• Traxxas Stability Management® (TSM)

• Helps prevents spinouts and loss of control

• Adjusts from off to 100% assistance from the transmitter

• TQi™ 2.4 GHz 2-Channel Radio System with Wireless Module

• Factory-installed telemetry sensors

• 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports

• Automatically stores and loads settings for up to 30 Traxxas Link-enabled models

• Clipless Body Mount System

• One-hand installation and removal

• Uses pivoting rear latch mechanism

• Eliminates body posts and clips

• Reinforced for extra protection

• Drivetrain

• Full-time shaft-driven 4-wheel drive

• Machined, hardened steel pinion and spur gear

• All-metal gears and CV driveshafts

• Torque-Biasing Center Drive™ absorbs shocks and distributes power

• 24 mm splined wheel hexes

• Wheel hexes retained with a clip

• 17 mm hex on outside of wheel

• Sealed, silicone fluid-filled diffs with large module ring and pinion gears

• Splined outdrives attached with external thru-bolt method

• Fully machined aluminum stub axles

• Splined aluminum center driveshaft

• Fixed Motor Mounting System

• Rigid aluminum motor mounts

• Preset gear mesh adjustments

• No manual adjustments required

• Motor retention separate from gear mesh

• Modular Composite Chassis

• Modular chassis interlocks with front and rear bulkheads

• Motor mounts to rear bulkhead to eliminate gear crunching flex

• Easy to service and access components

• Driveline is sealed in the chassis to keep out dirt and grit

• Snap-Lock Battery Retention System

• No body clips or hook and loop straps

• Battery hold-downs pivot for easy access

• Adjustable for battery size

• More secure than conventional retention systems

• Integrated into chassis top brace for improved battery tray and chassis stiffness

• Steering

• 6061-T6 aluminum steering bellcranks

• 2085X high-output metal gear steering servo

• Double-shear aluminum servo horn

• Heavy-duty servo saver spring

• Suspension

• TUBES 7075-T6 Aluminum front toe links

• All critical suspension points have double shear strength

• High strength steel suspension pins with aluminum retainers

• Suspension pins retainers won’t come loose or “back-out”

• 4 mm machined pivot balls

• C-hub and steering block geometry maximizes steering angle

• Adjustable roll center

• Steel upper and lower tie bars

• Full contact sealed bearings used in exposed locations

• Aluminum GTX™ Shocks

• Machined aluminum threaded body

• Extra-large bore and capacity

• Ultra-smooth TiN-coated 5.2 mm damper shafts

• Lower seal cartridge includes integrated wiper seal combination

• Adjustable aluminum upper spring retainer

• Aluminum shock caps with pivot balls

• Fixed shock locations

• Lower spring perches bolted on

• Bumpers

• Front energy absorbing rubber impact bumper

• Lower front and rear skids for impact and abrasion resistance

• Integrated nerf bars for side impact resistance

• Wheels/Tires

• Massive 8.4″ Sledgehammer® belted tires

• Virtually eliminates ballooning at high speeds

• Open tread block design

• 2-piece foam insert

• High-strength glue and bead design

• Large, dual-diameter wheels

Specification:

Include:

• X-Maxx Ultimate, Ready-To-Race model with Traxxas Big Block™ brushless motor

• VXL-8s waterproof electronic speed control with integrated telemetry

• Quick Start Guide

• TQi 2.4 GHz radio system with factory-installed wireless module

• High quality maintenance tools

Required:

• Batteries

• Charger