Tamiya 1:10 Ford F-350 (High Lift) EP

Specifications

Features

METAL & METAL PLATED PARTS

ADD LED LIGHTS (SOLD SEPERATELY)Use Multi-Function Unit (currently in development) to depict working headlights, tail lights and roll bar lights for even more incredible realism. (Multi-Function Unit is planned to include LED lights).

MULTI FUNCTION UNIT (CURRENTLY IN DEVELOPMENT)Currently in development, with release date To Be Announced, this Multi Function Unit will bring even more enjoyment to the operation of the R/C Ford F350. Featuring realistic sound effects recorded from actual vehicles, controllable LED lights and other movement effects, this unit will greatly expand the potential of your Ford F350.

LADDER FRAMEDurable and realistic ladder frame consists of steel channel and resin cross member.

PROPELLER SHAFTSF/R propeller shafts feature universal joint to efficiently transmit power even if suspension is moving up and down.

QUICK BATTERY HOLDER

4WS STEERING ROD

WHEELS & TIRES

3-SPEED TRANSMISSION

SLIPPER CLUTCH

DIFFERENTIAL GEARDurable resin gear case with integrated die-cast differential gear.

DIFFERENTIAL LOCK

LEAF SPRING SUSPENSIONF/R suspension with friction dampers allows tension adjustment by altering number of leaf springs.

FRICTION DAMPERS

BEARINGSKit includes a total of 42pcs of bearings (35pcs x 1150, 4pcs x 1260, 2pcs x 850 size metal and 1pc of 1050 size ball bearings). Metal bearings require periodic application of grease to maintain performance. Separately available ball bearings do not require this treatment, and are highly

MOTORThis kit is designed to be used only with pre-supplied type 540 motor and pinion gear.

REQUIRED ITEMS (NOT INCLUDED) RADIO CONTROL UNIT TRANSMITTER, RECEIVER, ELECTRONIC SPEED CONTROLLER (ESC), STEERING SERVO & SHIFT SERVO

ELECTRONIC SPEED CONTROLLER

SERVO

BATTERIES

Battery and Radio information1. Any Tamiya 7.2V battery can be used to power the vehicle. Different milliampere-hour (mAh) values may effect the amount of running time enabled by the battery. For example, 7.2V 1400SP battery should normally enable 10 to 15 minutes of running time. However, please note that actual running time may decrease due to extended full throttle and other high power running.

2. The following 4-channel R/C unit (self-neutral stick type transmitter/receiver) is recommended for optimum operation: FUTABA ATTACK 4WD (T4VWD/FP-R114H) The Airtronics VG400/600 model radios are also capable as they feature slide trim and self neutral control sticks.

Be aware that using an R/C unit without a self-neutral system may increase difficulty of operation. Without self-neutraling channels (spring loaded sticks) the operator is left to center the throttle and steering without the aid of self-centering springs, which makes driving the truck harder than it needs to be.

4-channel wheel-type transmitters can be used with ITEM 58372, but will not be able to be used with kit equipped with Multi-Function Unit (To be released).

PPM receivers are recommended for use with this kit. PCM receivers are not compatible with kit equipped with Multi-Function Unit.

Other makers' radio control units of 4 or more channels can be used, but may not realize the optimum functioning of this kit. Recommended use of similar R/C unit as used with ITEM 56511 Tractor Truck Multi-Function Control

ELECTRIC KITS REQUIRE:(unless stated differently above)

Items Required (not included)