This is Overdose Spur Gear Support Plate Type 5 Gold For 1/10 RC Drift. Finally, the 5th spur gear support plate Type-5 will be released. By adopting an unprecedented super 3D design, the spur gear support plate, which tends to be flat, is given an unprecedented three-dimensional effect. In addition, by covering the center boss part of the spur gear holder with a design, we were able to achieve a larger and more elaborate finish. The thickness is 4.5 mm, the outer diameter is φ28 mm, and the mounting PCD is a small size that is common in drift cars. Also, please note that it cannot be installed on a chassis in which the amount of protrusion of the spur gear holder from the spur gear exceeds 2.5 mm as shown in the figure below.
For: 1/10 RC Drift
Overdose Spur Gear Support Plate Type 5 (1 pc)
Screw (4 pcs)