This is Overdose Aluminum Adjustable Rear Suspension Arm Type-3 Set Purple For 1/10 RC Drift. It is a fully adjustable aluminum rear suspension arm. By adopting a 4-piece structure, it is possible to widely adjust the arm length, trailing angle, shock mounting position, and wheelbase. The arm length can be adjusted in 12 steps in 1mm increments within the range of 53mm to 42mm. By shifting the mounting position of the front and rear adjuster blocks by one or two steps, the trailing angle can be set to 3 degrees and 6 degrees. In addition, the front and rear width of the suspension arm has been narrowed by 7mm compared to the normal model, allowing for a wider range of wheelbase adjustment than ever before. Although it is multi-functional and highly rigid, it weighs only 2.8g (compared to normal), and has succeeded in reducing weight by about 52% compared to Type-2. In addition, a 22mm long suspension pin is used (included) on the upright side.
For: 1/10 RC Drift
Overdose Aluminum Adjustable Rear Suspension Arm Type-3 Purple (1 set)