Search

Description:Adjust the distance between the two ballends on the steering bridge with this insert steering bridge system! What this achieves is different ackermann settings and adjusts how much steering angle difference you can achieve between the outside and inside tires when you turn. By using a la..

Description:Aluminum bottom chassis for Execute XQ2S, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity! It also fits with XQ1 and XQ1S...

Description: Aluminium Anti-Roll Bar Bushing, genuine official replacement part from Xpress. Included are two pieces that can be inserted into the bulkhead or attaches to the end of the roll bar...

Description: Replacement part for the Mid Mount FWD XQ2S conversion kit #XP-10829..

Description:Replacement part for the Mid Mount FWD XQ2S conversion kit #XP-10829. It also fit with XQ10F but the servo mount plate out of box from XQ10F was made by carbon fiber...

Description:Replacement part for the Mid Mount FWD XQ2S conversion kit #XP-10829..

Description: 3x6x2.5mm flanged bearing, for use in Execute Flex Elimination Upper Deck adjustment area.The Flex Eliminator Upper Deck comes out of box from the XQ2S, FM1S and XQ10F kits. If use with XQ10, please use with 2.0mm Graphite Upper Deck For Flex Elimination #XP-10639; If use with XQ1 / X..

Description:FWD Conversion kit for the Xpress Execute XQ2S and XQ1S, FWD drivetrain combined with a center of gravity shifted towards the center. By moving the pulley, the motor has been moved forwards as well putting more weight forwards and changing the weight balance by shifting one of the most h..

Description: Aluminum center pulley for the Execute XQ10, providing more durability at the expense of drivetrain efficiency. Recommended for use in high powered touring car racing classes...

Description: Aluminum center pulley for the Execute XQ10, providing more durability at the expense of drivetrain efficiency. Recommended for use in high powered touring car racing classes...

Description:Updated C Hubs found on the Execute XQ2S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the #XP-10401 C-hub king pin set!..

Description:V2 of our rear uprights. We have further added more material to the hub for higher durability.**Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspension pins #XP-10602 and Hard Strong Front And Rear Composite Suspension Arms #XP-10597..

Description: Optional Graphite Chassis plate for the Execute XQ2S, XQ1S and XQ1 giving you better performance at high temperature tracks and provides more consistent handling when compared to the stock chassis...

Description:Replacement upper bulkhead set for the Execute XQ2S. Comparing to older version of composite bulkhead from the other Execute Sport series chassis, the V2 bulkhead comes with one more hole for positioning the camber link, allows you to adjust the roll-center in another way. It also allows..

Description: Optional Graphite Top Deck for the Execute XQ2S, XQ1S and XQ1, giving you better performance at high temperature tracks and provides more consistent handling when compared to the stock chassis.Required Aluminum Upper Deck Collar For Flex Elimination #XP-10683 or Composite Upper Deck Col..

Description:Updated C Hubs found on the Execute XQ2S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the #XP-10401 C-hub king pin set!..

Description:Short shock sets as same as the original ones that came with the Execute XQ2S, will also fit other Xpress series cars with short shock towers installed!For XQ1, XQ1S and XQ2S, please use: FRP 3.0mm Front Short Shock Tower #XP-10791 and FRP 3.0mm Rear Short Shock Tower #XP-10792, or Gra..

Description:Replacement King pin for the new V2 Strong C-Hub found on the Execute XQ2S, be sure to keep a set in your parts bag or when you're upgrading from the old C Hubs!Note: To use this new collar with other touring chassis in the Execute series, including XQ10, XQ10F, XQ1, XQ1S, FT1, and FT1S,..

Description: Replacement FRP shock tower the Execute XQ2S! Also fits on the Execute XQ1S if you want to upgrade your ride to run short shocks #XP-10797...

Description: Replacement FRP shock tower the Execute XQ2S! Also fits on the Execute XQ1S if you want to upgrade your ride to run short shocks #XP-10797...

Description:Replacement shock parts for the Sports Short Shocks XP-10797 as well as on the Execute XQ2S! Keep some spares or change out when your original parts develop slop from collisions on the track! Enough parts in one pack to rebuild four shocks!..

Description:Body support braces to be used in conjunction with the new V2 Strong C Hubs, found on the Execute XQ2S or even for upgrading your Execute series car!**Note: For Execute XQ1, XQ10, XQ10F, XM1, FT1, XQ1S, XM1S, FT1S, FM1S, need to use with V2 Strong Composite C Hub 4 Degree #XP-10400 or Ha..

Description:Replacement shock parts for the Sports Short Shocks XP-10797 as well as on the Execute XQ2S! Keep some spares or change out when your original parts develop slop from collisions on the track! Enough parts in one pack to rebuild four shocks!..

Description: Replacement part for the Short Shock Set found on the Xpress Sport series of cars...

Description: Replacement part for the Short Shock Set found on the Xpress Sport series of cars...

Description:Replacement motor mount for the Execute XQ2S, which also fits the XQ1S which gives more options for flex adjustment and the motor is 1.5mm closer to the centerline when compared to the old one...

Description:Replacement part for the Short Shock Set found on the Xpress Sport series of cars...

Description:Different from other "entry" level priced touring car kits, the XQ2S has drawn it's inspiration from the race proven Execute XQ10! With adjustable suspension and steering to better prepare newcomers to the on-road touring car scene for the different type of setup changes you can make.Fit..

Description:Xpress Execute XQ2S body decals! Comes with different size decals for use on the bonnet, sides and even wing endplates!..

Description:Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without using tape, the chassis is not under pressure and will not tweak!..

Description:High grip M-Chassis Specific Drift tires from Xpress! Features clear color marking for easy identification of tire compound. Flat surface will allow the maximum contact patch with the surface during on and off throttle, comes in different hardness which makes using this tire to drift you..

Description:Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside!Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the..

Description:Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside!Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the..

Description:Mount your spur evenly with this aluminum Spur Gear Support Plate! The aluminum piece creates an even distributed load which allows for a precise and quiet drivetrain. Comes in the signature black with red highlighted edges and laser engraved Xpress logo!..

Description: High grip M-Chassis Specific Drift tires from Xpress! Features clear color marking for easy identification of tire compound. Flat surface will allow the maximum contact patch with the surface during on and off throttle, comes in different hardness which makes using this on any surface s..

Description:Run short shocks (#XP-10593) on your Execute XQ1 XQ1S or XQ2S! With short shocks you get more stability through corners which results in more consistent laptimes!**Note: For XQ1 and XQ1S, need to use with Execute XQ10 Short Shock Set V2 Long Travel #XP-10593 or Sports Composite Short Sho..

Description:Run short shocks (#XP-10593) on your Execute XQ1 XQ1S or XQ2S! With short shocks you get more stability through corners which results in more consistent laptimes!**Note: For XQ1 and XQ1S, need to use with Execute XQ10 Short Shock Set V2 Long Travel #XP-10593 or Sports Composite Short Sho..

Description:Xpress Execute XQ10F body decals! Comes with different size decals for use on the bonnet, sides and even wing endplates!..

Description:Gain more mechanical grip with this high flex chassis for use on low to medium tracks. Cut out slits around the motor mount area allowing more flex in the central area, combined with a different weave pattern greatly increases the flex of the graphite!..

Description:Graphite upgrade for our Execute M-Chassis Mini cars, you will be able to run our V2 Short Shock set (#XP-10593) to get a even better handling car!..

Description:Convert your Execute FM1S to 239mm wheelbase, which results in the most stable handling car for extremely high or low grip conditions. By having such a long wheelbase, you car will be very stable throughout the corner. Note: To be used with the 239mm wheelbase chassis plate #XP-10764...

Description:Convert your Execute FM1S to 239mm wheelbase, which results in the most stable handling car for extremely high or low grip conditions. By having such a long wheelbase, you car will be very stable throughout the corner. Note: To be used with the 239mm wheelbase chassis plate #XP-10764...

Description:Convert your Execute FM1S to 239mm wheelbase, which results in the most stable handling car for extremely high or low grip conditions. By having such a long wheelbase, you car will be very stable throughout the corner...

Description:Convert your Execute FM1S to 225mm wheelbase, which results in a more stable car but sacrificing some steering. Graphite decks also provide more consistent handling when compared to the glass fiber. Note: To be used with the 225mm wheelbase chassis plate #XP-10761...

Description:Convert your Execute FM1S to 225mm wheelbase, which results in a more stable car but sacrificing some steering. Graphite decks also provide more consistent handling when compared to the glass fibre. Note: To be used with the 225mm wheelbase chassis plate #XP-10761...

Description:Convert your Execute FM1S to 225mm wheelbase, which results in a more stable car but sacrificing some steering. Graphite decks also provide more consistent handling when compared to the glass fibre...

Description:Adjust the distance between the two ballends on the steering bridge with this insert steering bridge system! What this achieves is different ackermann settings and adjusts how much steering angle difference you can achieve between the outside and inside tires when you turn. By using a la..

Description:Replacement bearings for use with single jointed universals...

Description:Graphite upgrade for our Execute M-Chassis Mini cars, you will be able to run our V2 Short Shock set (#XP-10593) to get a even better handling car!..

Description:For some specific tracks that require less chassis flex, this one piece top deck on your FWD Converted XQ10 will allow more control and stability whilst cornering in both low and high speed corners! It fits with XQ10F as well...

Description:Replacement bearings for the diff holders on all of the Xpress Cars...

Description:Replacement bearings for the Center pulley found on the Execute XQ1...

Description:Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short!..

Description:Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day isn't cut short!..

Description:Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short!..

Description:For some specific tracks that require less chassis flex, this one piece top deck will allow more control and stability whilst cornering in both low and high speed corners!..

Description:FWD Conversion kit for the Xpress Execute XQ10, FWD drivetrain combined with a center of gravity shifted towards the center. By moving the pulley, the motor has been moved forwards as well putting more weight forwards and changing the weight balance by shifting one of the most heavy obje..

Description:Replacement plastic shock parts for the V2 long travel short shock set #XP-10593, this is a direct upgrade for the stock shocks from the XQ2S. It can still fit with original kit short shock from XQ10 and FM1S, but the shock length will be decrease by 1mm, so it is recommended to use Lo..

Description:Original replacement part for Execute FM1S XQ10F, keep spares ready so your race day won't cut short!..

Description:Original replacement part for Execute FM1S XQ10F, keep spares ready so your race day won't cut short!..