Search

Description: Reduce the amount of free play you might get from bearing slop in your driveshafts with these shims. Applicable to the front or rear...

Description:  Easy to use fan mount for most FF cars on the market! Screws onto the two un-used motor holes which plasces the fan ontop of the motor directly for maximum cooling and doesn't interfere with the bumper of your body...

Description: Redesigned X-Rings for smoother operation, with a revamped material choice which operates better in hot weather and last longer!..

Xray T4 High-Performance Kevlar Drive Belt Rear 3x189mm #XR-305446Description: Specially-modified high-performance Kevlar®-reinforced 189mm-long and 3mm-wide rear drive belt comes standard in XRAY T2’009 Rubber-Spec Conversion Set – 38T Pulley. This belt is very thin and elastic as possible for an..

X-Square Spring Steel Double Joint Driveshaft 41mm for Xray T2 T3 T4 XPRESS XQ1 XQ1S #XP-20018 Description: Smoothen your car's cornering with these Double Jointed Driveshafts by X-Square! Compared to traditional single jointed drive shafts, by having double joints the angle of the universal at full..

Description: Softer, less contact path allows these X Rings to not generate as much drag on your diff cups when compared to traditional o-rings!..

Description: Spring steel double jointed universals with a replaceable pin to exchange when worn out! Smoother cornering when compared to traditional single jointed universals!Note: When using this part for upgrading the universal shaft from XQ1S, XQ2S and FT1S, need to change the 5x10x4mm ball be..

Xray Harden Piston Rods For Keyed Pistons for T1 #XR-308360Description: Set of two keyed rear piston rods for use with XRAY shock absorbers. (All four XRAY shock absorbers use the same parts.) NOTE: These piston rods are NOT interchangeable with piston rods for Hardened Pistons Rods for Keyed Pist..

Xray Aluminum T6 Differential Long Output Shaft - Hard Coated - Black for T2 T3 #XR-305012-KDescription: This is the Xray Aluminum T6 Differential Long Output Shaft - Hard Coated - Black. CNC-machined long output shaft for #XR-305003 / XR-305004 Aluminum Ball Differential, made from special Swiss ..

Description: Narrow wheel hexes for easy trackwidth setup change! Fits modern touring cars which use the hex and locknut wheel mounting system. Laser engraving for you to easily see what width optional wheel hex it is...

Description: Narrow wheel hexes for easy trackwidth setup change! Fits modern touring cars which use the hex and locknut wheel mounting system. Laser engraving for you to easily see what width optional wheel hex it is...

Xray T3 Dual Servo Saver Set #XR-302506Description: These are the Xray Dual Servo Saver Set. The new double steering system is ALL NEW for XRAY electric touring cars. The double steering system is supported by 6 ball bearings and runs on aluminum stands. Ackermann is easily adjusted by inserting s..

Xray Upper Deck Evo 2 - 2.5mm Graphite - CNC Machined for T1 #XR-301161Description: CNC-machined 2.5mm graphite upper deck for T1 EVO2. Stiffer than stock T1 EVO2 upper deck...

Xray Aluminum Lower Front Suspension 1-Piece Holder - Orange v2 for T3 T4 #XR-302047-ODescription:The optional 1-piece aluminum suspension holder is a direct replacement for the standard rearward holders of the FRONT suspension. The aluminum suspension holder reinforces the chassis and will help..

Xray T1R Composite Top Deck Mount #XR-306500Description: Molded support for #XR-301167 composite upper deck. Connects upper deck to chassis for extra rigidity...

Xray Anti-Roll Bar - Male for T1 #XR-302450Description: Front male anti-roll bar. Manufactured from world-renowned top-secret "Hudy Spring Steel". Maximum precision and quality...

Xray Anti-Roll Bar - Female for T1 #XR-302440Description: Front female anti-roll bar. Manufactured from world-renowned top-secret "Hudy Spring Steel". Maximum precision and quality...

Xray 2x14mm Pin 10 pcs Silver For X1 NT1 #XR-981214Description: This is Xray 2x14mm Pin 10 pcs Silver For X1 NT1...

Xray 38T Composite Solid Axle Set for T2 T3 T4 #XR-305188Description: Unique lightweight composite front solid axle for XRAY T2’008, T2'009, T3 EU Rubber-spec Edition. The new composite solid axle has a very stiff structure and ultra-light weight that was achieved by injecting the entire solid axl..

Xray High-Performance Kevlar Drive Belt Front 3x513mm for T2 T3 T4 #XR-305432Description: Specially-modified high-performance Kevlar®-reinforced 513mm-long and 3mm-wide front drive belt comes standard in XRAY T2’009 Rubber-Spec Conversion Set - 38T Pulley. This belt is very thin and elastic as pos..

Xray Differential Bevel & Satellite Gears for NT1 #XR-335030Description: Differential gears for gear differentials are made from pressed steel, heat treated, and machined for ultra-precision and smooth operation. Includes 2 bevel and 4 satellite gears..

Xray 20T Fixed Pulley 20T for T2 T3 T4 #XR-305577Description: Precision-molded 20T layshaft pulleys for XRAY T2’008, T2'009 and T3 includes composite shims. Standard pulleys for XRAY T2’008, T2'009, T3 US Foam -spec Edition. Set of 2..