Menu
Your Cart
【Special Price】Final Discount Price shows up only after Login!! 

Hobbywing XR10 Justock G3 Sensored Brushless ESC w/ 21.5T G2.1 Motor Combo Set

XR10 Justock G3 Sensored Brushless ESC w/ 21.5T G2.1 Motor Combo Set
XR10 Justock G3 Sensored Brushless ESC w/ 21.5T G2.1 Motor Combo Set
XR10 Justock G3 Sensored Brushless ESC w/ 21.5T G2.1 Motor Combo Set
XR10 Justock G3 Sensored Brushless ESC w/ 21.5T G2.1 Motor Combo Set
XR10 Justock G3 Sensored Brushless ESC w/ 21.5T G2.1 Motor Combo Set
XR10 Justock G3 Sensored Brushless ESC w/ 21.5T G2.1 Motor Combo Set
XR10 Justock G3 Sensored Brushless ESC w/ 21.5T G2.1 Motor Combo Set
XR10 Justock G3 Sensored Brushless ESC w/ 21.5T G2.1 Motor Combo Set
XR10 Justock G3 Sensored Brushless ESC w/ 21.5T G2.1 Motor Combo Set
XR10 Justock G3 Sensored Brushless ESC w/ 21.5T G2.1 Motor Combo Set
XR10 Justock G3 Sensored Brushless ESC w/ 21.5T G2.1 Motor Combo Set
HKD 858.00
HKD 1,092.00
Please login to view the HK Special Price for this product
Last Few Pieces Left!
For delivery address outside Hong Kong, please go to rcMart Global Store to order

Description:

The Hobbywing XR10 Justock G3 Sensored Brushless ESC/SD G2.1 Motor Combo has been designed with fixed, 0°, timing for spec class racing. The included SD G2.1 motor is an ideal stock motor for both 1/10 and 1/12 on and off-road racing. These two components paired together make for an ideal choice for beginners and experts alike.


Feature:


  • Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system

  • Programmable via OTA Bluetooth module or 3in1 program box

  • Built-in capacitor module eliminates the need for external capacitors and unwanted space

  • RPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box)

  • Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racing

  • Built-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4V

  • Calibration or preforming a factory-reset can be achieved by using this SET button. Simple and easy to use

  • Supports both CCW (counterclockwise) and CW (clockwise) motor directions

  • Protection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protection

  • Supports ESC firmware upgrades

  • User-friendly and convenient for set-up

  • Use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability

  • Built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand

  • Silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor

  • Detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency

  • This Justock motor is applicable to various 1/10th, 1/12th on-road Stock Spec Racing, ICC, IOCC, USVTA, TOUR, Oval racing. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice

  • The motor design is in compliance with IFMAR, and ROAR specifications


Specification:


ESC:

  • Continuous Current: 60A

  • Burst Current: 380A

  • Battery: 2S Lipo (Only 2S)

  • Built-in BEC: 6V/7.4V @ 4A(Switch-mode)

  • ESC programming: Independent programming port

  • Motor Supported: Sensor and sensorless brushless motor

  • Motor Limit: 10.5T, or greater, 3650 Motor

  • Application: 1/10, 1/12 On-road and Off-road

  • Cooling Fan: Powered by BEC

  • Size: 40.9x33.9x32.1mm (LxWxH)

  • Weight: 75.4g (Including weight of wire)


Motor:

  • Scale: 1/10, 1/12

  • Brushless: Yes

  • Sensored: Yes

  • Pole Count: 2

  • KV Rating: 2050

  • LiPo Cells: 2-3S

  • No-Load Current(A): 3

  • Outer Diameter: 35.9mm (1.413")

  • Length: 52.5mm (2.067")

  • Shaft Diameter: 3.17mm (0.125")

  • Weight: 175g (6.17oz)

  • Timing: Fixed


Include:


  • Hobbywing XR10 Justock G3 Sensored Brushless ESC w/ 21.5T G2.1 Motor Combo (1 set)


Specifications
BrandHobbywing
Motor Turn21.5T
Motor TypeBrushless
Sensor TypeSensored

Write a review

Please login or register to review
We use cookies to give you the best possible experience on our website. By continuing to browse this site, you give consent for cookies to be used. For more details please read our Privacy Policy.