Xpress 多工能油壓工具鉗


Xpress 精心研製的「攞你命3000」超級油壓工具鉗! 集合了多種遙控車常用工具於一身,當中包括油壓窄闊筒固定位、插頭固定位、波頭安裝及移除工具、油壓芯量度、.....,每一樣都係獨當一面,慳水慳力,有時間玩多D模型!

為了更容易組裝、維修及處理油壓,Xpress 發布了全新的 7075鋁製 遙控車油壓多功能工具鉗 (XP-40208)。集多種功能於一身,無需使用多種不同的工具,即可更輕鬆、更快速地構建遙控車避震器。黑色工具鉗身顏色配以搶眼的紅邊,十分貼合 Xpress 的主題色。

To make shock building easier, Xpress has released the Aluminum 7075 Shock Assembly Multi-Tool # XP-40208. Featuring several features to make shock building easier and quicker without having to grab several different tools.


功能簡介



備有不同直徑的半圓位,兼顧了傳統的窄筒 (Narrow Bore) 及近年流行的闊筒 (Big Bore)使用者的需要。您可以將不同大小的油壓筒固定,方便您將油理頂蓋擰緊。
Different large diameter grips for you to screw the top cap on with both big bore and narrow bore shocks if your car still runs them.


工具尖端的梯級式標記讓您輕鬆地測量油壓軸的長度。結合最常用的長度,這樣您就可以確保所有四個油壓(減震器)的長度相同,從而實現更一致的油壓處理。
Easily measure shaft length with the marked steps at the tip of the tool. Incorporate the most used lengths so you can ensure all four shocks are of equal length for more consistent handling.


除了處理油壓之外,在工具上有兩個直徑分別 4mm 和 5mm 的圓孔,在焊接電池連接插頭時可將插頭固定,讓您輕鬆地將電線焊接到插頭上,方便就手同時亦減低了損壞電池的機會。
Besides building shocks, Xpress has included a 4mm and a 5mm hole to hold the battery connector plug in place so you can easily solder the wire to the connector without risk of damage to your battery.


中間部分內置了一個鋼製延伸件,以幫助將活動球安裝到連桿和油壓器上,將連桿對準與球尺寸相對應的孔,您可以輕鬆卸下活動球。
A steel extension is built into the middle section to aid with installing balls to your links and shocks, Line your link to the hole corresponding to the ball size and you can easily remove the ball.


圖片示範了用於將活動球安裝到鏈接上,另一側的小孔為 3 毫米,非常適合將螺紋球固定到側面,因此不會脫落。
Pictured here is for installing the ball to your link, the small hole on the other side is 3mm perfect for securing threaded balls to the side so it doesn't fall out.


階梯式測量部分,用於在重新安裝油壓器隔膜時可以輕鬆設置震動的回彈
Last but not least, is a stepped measuring section for easily setting the rebound of your shock when placing the diaphragm back on.




更多 Xpress 工具:
https://hk.rcmart.com/Xpress 


更多遙控車保養維修工具:
https://hk.rcmart.com/RC-Car-Maintenance-Tools