Orlandoo | 1/32 Scania R650 6X4 Tractor Truck

13 Sep

Posted By ava.lung 0 Comment(s) 5004 View(s) RC Cars

Orlandoo | 1/32 Scania R650 6X4 Tractor Truck

OH32T01 Truck Kit (Scania)OH32T01 KIT (SCANIA R650 6x4)

Orlandoo 1/32 Scania R650 6X4 Tractor Truck PRE-ORDER

High quality and durable! Easy to carry this mini tractor truck everywhere you want to go and play. Pre-order to get yourself one at rcMart now!

>> Pre-order It Now <<

Orlandoo 1/32 Scania R650 6X4 Tractor Truck

Orlandoo’s first fully authorized and licensed 1/32 RC Semi Truck, the Scania R650 Sleeper Highline! OH-Model has gone above and beyond to bring us this 6×4 Euro style cabover tractor unit. Modelled after the legendary Swedish King of the Road, this kit has the official seal of approval from Scania themselves.

Follow the exquisite lines of the faithfully reproduced cab styling. Yes, even the pressed steel cab-back detail has been re-created in 1/32 scale. Fuel and air tanks that are not normally going to be visible, and could easily have been omitted are also present and correct. Grille detail, step treads, mirrors, every light and every logo badge. All is where it should be, right down to the Scania-embossed rubber mud flaps.

The all-new unpowered front axle is suspended on stacked leaf springs, just like the 1:1. The twin, powered rear axles utilize an ultra-realistic trailing arm and simulated air-bag setup. The Orlandoo Hunter OH32T01 kit has the most individual components of any Orlandoo model to date. It gives shade to even the OH32N01 caravan and OH32M02 6×6, neither of which were exactly short on scale detail. Orlandoo’s use of etched parts in this kit is at an all-time high. Yet all the while they have retained the robust build quality we have come to expect from their kits. High quality ABS plastics, steel chassis rails, brass gears and metal mounting rods for the rear arches all ensure the durability needed for an RC vehicle.

The Orlandoo Hunter OH32T01 kit does not include any electronics. It requires the now familiar Orlandoo recipe of a 2.2g micro servo and N20 geared motor, plus ESC, radio and battery of your choice. If you want to add lighting then 1206 SMD LEDs are used throughout. As with other Orlandoo models, thoughtfully designed mounting locations make installation a breeze – provided you can solder! The rear axle internals are standard Orlandoo fare – solid axle and brass gears. You can swap in optional MG2-460 open differential axles to gain improved turning at the expense of overall traction. The stock plastic driveshafts are plenty durable, but you can upgrade to MD3-225 and MD3-375 ultrafine CVD shafts if you wish.