Most RC car bodies are made from polycarbonate plastic (PC, aka Lexan). ... The bodies are formed by vacuuming a clear PC sheet over a mold. The body is then painted on the inside surface, which effectively makes the PC a thick, glossy clear coat. If painted correctly, a body can last and look good for a long time.
These spray paints were developed especially for decorating transparent polycarbonate (Lexan) bodies used in R/C car model. Each can contains 100ml of paint, which is the appropriate amount for finish a model. Keeping the can about 30cm from the surface when spray the paint on the inside. After curing, apply another coat. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.